dyneema marine rope

Mooring and towing ropes made with Dyneema® have an increased service life when compared to both steel wire and synthetic ropes. Numerous examples at a broad range of end-customers have proven that the lifetime is typically 2 4 times the lifetime of other rope materials, the exact lifetime being dependent on the specific situation.

 Easy handling

Ropes made with Dyneema® weigh only a fraction of equally strong steel wire and synthetic ropes. The lightweight makes ropes made with Dyneema® particularly easy to handle. This results in reduced mooring times up to 50% and higher, crew reduction, less back- and hand injuries, and a lower risk potential.

Ropes made with Dyneema® have a low elongation, falling to less than 3% at break for a used rope. The low elongation results in a low energy storage level in the rope, which leads to hardly any backlash of the rope in case of failure. Using ropes made with Dyneema® minimizes the risk potential for crew working on board the ships.

Dyneema® is a synthetic material. Therefore, ropes made with Dyneema® do not need a lot of maintenance. Greasing of the rope is not necessary, as is the case for steel wire. Ropes made with Dyneema® do not damage chocks, bits, fairleads and other parts of the ship nor do they pollute the deck of the ship or the environment due to the absence of grease. Both features directly lead to economic and environmental savings.

Low diameter, high strength, low weight, float on the water etc

Better control , safety, increasing economic profit

Easy handling, torque free, safety, less maittenance

Better bending compare to traditional wire rope etc. safety